- Bushing diameter: 10mm
- Anti-Vandal IP Degree: IP40
- Stainless steel
- Technical Data
- Order Code
Switch rating: 0.5A/220VAC
Contact Configuration: 1NO1NC
Operation type: Momentary/Latching(Z)
The Crust Material: stainless steel
IP Degree: IP40
Terminal type: Pin terminal (1.8×0.4)
Operation stroke: about 2.5mm
Electrical life: more than 50,000 times
Working ambient temperature: – 25 ~55 (+no freezing)
L10 Series Metal Anti Vandal Switch
Langir offers a broad line of metal anti-vandal switches, including the L10 series. As with other metal switches, this series can withstand the usual wear and tear from repetitive or high usage but may be needed to be placed in the right working environment that meets its specifications.
The L10 Series Metal Anti Vandal Switch is highly certified, offering a rating of 0.5A/220VAC, with a bushing diameter of 10 mm, and 1NO1NC contact configuration.
This series can function either momentarily or in a latching way. Momentary requires continuous compression for it to function, as when pressed, the actuator springs back immediately signifying that the switch has returned to its natural state. On the other hand, latching does not require continuous compression as when first pressed, it functions continuously until the actuator is pressed again to return to its normal state.
Made from stainless steel with an IP degree of IP40, the L10 Series allows you to enjoy an anti-vandal switch that is protected from foreign objects specifically tools and small wires greater than 1 millimeter. However, this may not be the best option if you’re looking for an anti-vandal switch that is waterproof, as this one is not protected from liquids.
This series can also be customized with ring illumination or none at all, with a variety of color options including white, red, orange, green, blue, and yellow. You also have the options to choose the illumination voltage including 6V, 12V, 24V, 110V, and 220V. Take note that your voltage options of 6V to 36V are inner resistors, the other voltage can be made to order and will be needed to be connected on an outer resistor.
The L10 Series allows you to work effectively with compression-type terminal blocks with its pin terminal type measuring about 1.8 by 0.4 millimeters. Using this anti-vandal switch, you eliminate the possibility of damage from connecting to a compression-type terminal block while maintaining the flexibility of stranded wire in this manner.
It also has a high actuator that allows an operation stroke of about 2.5 millimeters, which makes it accessible and easy to operate.
With high-tech materials, precise measurement, and control technology, the L10 Series Metal Anti Vandal Switch has an electrical life of more than 50,000 times and works in an environment with an ambient temperature of – 25 ~55 (+no freezing). Both of these features make the L10 Series a popular option for use in kiosk applications, ticket dispensers, industrial-type applications, and more.