- High current 21A 24VDC
- 19mm diameter panel cutout
- Anti-vandal IK09/ Sealed IP65
- Backlit LED switch label kit available
- Momentary or Alternated options available
|Electrical rating:||21A 24 VDC|
|Mechanical life||1,000,000 cycles|
|Electrical life||50,000 cycles|
|Contact resistance||50 mΩ Max|
|Insulation resistance||1000 mΩ Min|
|Dielectric strength||2000 VAC|
|Operating temperature||`-20℃ to 55℃|
|Moisture protection||IP 65|
|Panel thickness||1-11 mm|
|Mounting nut torque||5-14 Nm|
|LED state for output image option|
|1 LED: the LED is ON when the output is cloosed|
|2 LEDs: first color is ON when the output is open,second color is ON when the output is closed|
|Features & Benefits|
L19Y Series High Current Anti Vandal Switch
When looking for an anti-vandal switch that can handle a high current rating, it is important to look for one that has remarkable features and benefits that will not disappoint you. That’s where the L19Y Series High Current Anti Vandal Switch comes into the picture.
The L19Y Series measures around 19 millimeters in diameter and approximately 90 millimeters in height. Its panel thickness, on the other hand, measures between 1 and 11 millimeters. It operates through a cable terminal with a length of around 1200 millimeters, and functions either momentarily or in latching position.
It has an electrical rating of 21A/24VDC, a mechanical life of one million cycles, and an electrical life of fifty thousand cycles.
In terms of resistance, it has a maximum contact resistance of 50 mΩ and a minimum of 1000 mΩ insulation resistance.
The L19Y Series is one of Langir’s anti-vandal switches that has a maximum protection against foreign materials especially dust and water, as manifested in its IP67 ingress protection rating.
As to its material, this series can be made from high-quality stainless steel or anodized aluminum in black.
Aside from being able to handle a high current rating, the L19Y Series creates an edge among other anti-vandal switches because of its capability of being customized, especially with its flat actuator.
The actuator, as usual, can be made with dot or ring illumination with several colors to choose from. But with the backlit label kit option, you have five icons to choose from as a label.
Among the several colors you can choose from are white, yellow, orange, red, blue, green, and a combination of either red and green or red and blue. All these, however, are not flexible in terms of voltage options as its only available at their base voltages.
When you opt for the L19Y Series with only one LED, the color will illuminate when the output is closed. However, if there are two LEDs, the first color will illuminate when the output is open but will change to the second color when the output is closed.
Another optional feature that the L19Y Series offers is the option to put a graphic in the actuator which is laser-etched.
The L19Y Series High Current Anti Vandal Switch, therefore, is your best choice if you are looking for an anti-vandal switch that could handle your high current rating and customization needs.