|Illuminated options||Non-illuminated/Ring illuminated/Dot illuminated|
|Max.switch rating||Ith:5A Ui:250VAC|
|Mechanical life||1,000，000 cycles|
|Contact material||Silver alloy|
|Actuator||Stainless steel/Anodized aluminum|
|Body||Stainless steel/Anodized aluminum|
|Red Green Yellow Orange Blue White|
L25 Series Big Size Anti Vandal Switch
Langir has an extensive catalog of anti-vandal switches available in multiple functionalities, designs, and sizes including its big-sized models cut out at 25 millimeters. One of these is the L25 Series Big Size Anti Vandal Switch.
The L25 Series measures 25 millimeters in diameter and can fit in a surface with panel thickness between 1 and 10 millimeters for momentary and between 1 and 12 millimeters for latching. Its body height measures approximately between 30 and 40 millimeters depending on function.
It has a flat head that comes in multiple lens options including dot illumination and ring illumination. As usual, these illumination styles can be customized with specific colors including red, orange, yellow, white, green, and blue. All of these LED colors will last a lifetime of forty thousand hours and are available at multiple voltage options including 3V and up to 220V.
If you are concerned about the size of illumination, it may come helpful to know that around 9 millimeters will be taken from the total diameter if you opt to have it with dot illumination. While it may measure around 15 millimeters to have the series with ring illumination.
When it comes to the material composition of the actuator and the switch’s body, the L25 Series can be designed and manufactured from either stainless steel or anodized aluminum. Its base, on the flip side, is specially made from PA, or more commonly known as nylon.
Whichever material you choose, Langir guarantees that the L25 Series Big Size Anti Vandal Switch can hold out against damages caused by daily use especially if you are planning to install it outdoors.
It has an ingress protection of IP65 which makes it both dustproof and waterproof. There is a limitation, of course, as to how much the L25 Series can tolerate the penetration of water, but when it comes to unintentional impacts, the L25 Series will not disappoint you. It has a resistance to external mechanical forces of up to ten joules as supported by its impact rating of IK10. Still, for maximum performance, it is best to have the L25 Series installed in an environment where the operating temperature is between negative 20 degrees Celsius and 55 degrees Celsius. This, however, is not difficult to meet as the outdoor temperature usually falls between this.
When it comes to the electrical data of the L25 Series Big Size Anti Vandal Switch, this series works at 5A/250VAC of maximum switch rating. It also comes in several function options including momentary and latching, both in 1NO1NC and 2NO2NC.
The L25 Series Big Size Anti Vandal Switch is your best choice if your primary consideration is a big-sized switch that is not only durable but also reliable.
At Langir, all our anti-vandal switches are tested and certified to meet your quality requirements.